Skip to main content

Posts

Showing posts from December, 2016

My Custom DIY 60% Keyboard

My Custom DIY 60% Keyboard
All the parts

1x GH60 (Satan) board - $35 61x Cherry Clear switches - $35 2x Cherry Blue switches - $3 10x Cherry Red switches - $10 1x PCB Stabilizer set (6.25 space) - $6 1x Royal Oak Glam 60% case (Black Walnut) - $78 1x Aluminium 60% plate - $19 1x SA profile Choclatier keycaps - $102 (base, modifiers, and novelties)
1x Braided Nylon USB cable - $15 Solder, Tools, Risers, Labor, etc.
Total: ± $300
(Other single switch types added as needed)
Testing the board I had my helper do the work here. We needed to test the board before applying any solder.
Assembling Add the stabilizers first Add the plate (using a few switches as spacers) Then add the rest
Solder solder solder...

And test again:


The casing The casing I received did to have built-in risers:

So I added my own:



Then Assemble (using temporary spare DSA Carbon Cherry profile keycaps):


Hmm... pretty.

And finally received my Chocolatier SA-profile keycap set!


Programming the GH60 The board is controlle…